Measure the area of the bathroom and then calculate the number of tiles required to re-do the area with the new tiles. You will obviously need to cut some of the tiles to make them fit near the sides and corners as the area will not be as per the dimensions of the tiles. While you are cutting the tiles, be careful not to damage them. Get a good tile-cutter for this job.
You can try softening the adhesive and then using a knife for removing it off. Then clean the entire place so that the debris is cleared off. It is important to wear goggles and gloves while removing the old tiles and cleaning the place as it is necessary to protect the hands and even bits can fly off and hurt your eyes. Please take note of sharp edges of the tiles while scrapping off the old bathroom tiles.
old bathroomvintage plumbing fixturesvintage cast iron bathroom sinkbathtub ideasshawer wallsvictorian sinkmaster bathroom design ideasbest bathroom designsconsole sinkspurple bathroom ideashow to design a bathroomdesign your bathroomshower room designbathroom design showroommodern retro bathroomguest bathroom ideasdrop-in tubsbeautiful bathroom designs
Here are some of the most popular bathroom tile shower designs – Glass. As of late, glass bathroom tile shower designs are becoming more and more popular. The most up and coming variation of glass tile is called the ”mosaic” effect. The mosaic effect is made up of thousands of tiny square glass tiles, usually in a variation of shades within the same base color. Glass tiled showers also attract the eco-activists because glass tiles are often composed of recycled glass. Aside from granite, glass tiles are by far the most expensive bathroom tile shower design of the bunch.
The Diagonal. For those people who are looking to deviate from the norm, the diagonal is the usual favorite. This design entails a different way of laying the tiles on the floor. As the name implies, it is all done in a diagonal fashion. This, by itself, is a good bathroom tile design and can be used with one type of tile.
Once your tiles are ready, mix your thinset and allow it to settle. Do not let it dry. Now carefully place the tiles on the grooves that you have made, and wipe off the excess thinset. You must not walk on the bathroom tiles that you have just installed for at least a day. This will allow the tiles to dry completely and make it ready for use.