The Diagonal. For those people who are looking to deviate from the norm, the diagonal is the usual favorite. This design entails a different way of laying the tiles on the floor. As the name implies, it is all done in a diagonal fashion. This, by itself, is a good bathroom tile design and can be used with one type of tile.
From this point, you will be working on fixing the new set of bathroom tiles. Remove the toilet pot by unscrewing the setup. Make sure you have the entire floor cleaned. You can do it by using a disposabl scraper and paper towels. More often than not, all the tiles will be of the same size.
ensuite bathroom designsbathroom designsgrey bathroom designswalk-in tubscool bathroom designsmaster bathroom designsvintage bathroom ideasshower room design ideaswall-mount sinksbathtub designbathroom renovation ideasmodern small bathroom designtiled showers picturessmall bathroom layout ideasbathroom ideas on a budgetvanities sinkssmall shower tile ideaslatest bathroom designs
Subway. Subway tiles may very well fall into the retro category; however subway tiles have remained one of the most popular shower design options for over half a decade. If applied correctly, shower tiles are the most seamless and clean-lines options available. Want another reason to choose subway tiles for your shower re-tiling? They are by far the most cost effective shower tiling solution.
The Border. This is perhaps one of the most common bathroom tile designs available. It comprises of putting together two different tiles where one of them are used as the main tile and the other as a border. This design can be done in a carpet-like way where all the main tiles are in the middle and the other tiles are at the edges or it can be done box-style like small carpets woven together.
Start Installing Your Tiles. This is the last step. In this step you should spread some adhesive onto the floor. Position the tiles and cut them around the corners of the room. Use your gloves so you do not get too messy. Put a tile separator in between as you wait the adhesive to dry up. After that, remove the separator and spread the grout. Let it dry and you are ready.